How To Make These 3 Ball's ?
With 3ds Max (3 OR 4)
************************To make the (Black-White) Ball************************
Go to creat and choose ---Hedra---
Go to modify and ---Parameters-----Family------Dodec/Icos-----
In the --------Family Parameters-----:Type:---- P:0.32 Q:0.02
Axis Scaling :Type:---- P:76.0 Q:105 R:105 ----Vertics: Basic----
And -----Radius:120
*****Then*****
Apply ----Relax-----
---Parameters---Relax Value (-0.15)
Iterations (2)
And check Keep Boundary Pts Fixed
*****Then*****
Apply-----Mesh smooth----
Check Keep (faces convex) and (Apply To whole Mesh)
Iteration (2) ------ Smoothness (1.0)
*****Finaly*****
Go to-------Material Editor------- And choose (Mulity/Sub-Object)
And Set Number to 2 Materials
1-Black 2-White
Don't Forget To press (assingn material to selection)
*****************************To make the (Blue/white) ball************************
Go to creat and choose ---Hedra---
Go to modify and ---Parameters-----Family------Dodec/Icos-----
In the --------Family Parameters-----:Type:---- P:0.32 Q:0.02
Axis Scaling :Type:---- P:89.5 Q:105 R:105 ----Vertics: Basic----
And -----Radius:120
*****Then*****
Apply ----Relax-----
---Parameters---Relax Value (-0.2)
Iterations (2)
And check Keep Boundary Pts Fixed
*****Then*****
Apply-----Mesh smooth----
Check (Apply To whole Mesh)
Iteration (1) ------ Smoothness (1.0)
*****Finaly*****
Go to-------Material Editor------- And choose (Mulity/Sub-Object)
And Set Number to 2 Materials
1-Blue 2-White
Don't Forget To press (assingn material to selection)
****************************To make the (Red/White) Ball**************************
Go to creat and choose ---Hedra---
Go to modify and ---Parameters-----Family------Dodec/Icos-----
In the --------Family Parameters-----:Type:---- P:0.32 Q:0.02
Axis Scaling :Type:---- P:89.5 Q:105 R:105 ----Vertics: Basic----
And -----Radius:120
*****Then*****
Apply ----Relax-----
---Parameters---Relax Value (-0.15)
Iterations (2)
And check Keep Boundary Pts Fixed
*****Then*****
Apply-----Mesh smooth----
Check (Apply To whole Mesh)
Iteration (1) ------ Smoothness (1.0)
*****Finaly*****
Go to-------Material Editor------- And choose (Mulity/Sub-Object)
And Set Number to 2 Materials
1-Red 2-White
Don't Forget To press (assingn material to selection)
With 3ds Max (3 OR 4)
************************To make the (Black-White) Ball************************
Go to creat and choose ---Hedra---
Go to modify and ---Parameters-----Family------Dodec/Icos-----
In the --------Family Parameters-----:Type:---- P:0.32 Q:0.02
Axis Scaling :Type:---- P:76.0 Q:105 R:105 ----Vertics: Basic----
And -----Radius:120
*****Then*****
Apply ----Relax-----
---Parameters---Relax Value (-0.15)
Iterations (2)
And check Keep Boundary Pts Fixed
*****Then*****
Apply-----Mesh smooth----
Check Keep (faces convex) and (Apply To whole Mesh)
Iteration (2) ------ Smoothness (1.0)
*****Finaly*****
Go to-------Material Editor------- And choose (Mulity/Sub-Object)
And Set Number to 2 Materials
1-Black 2-White
Don't Forget To press (assingn material to selection)
*****************************To make the (Blue/white) ball************************
Go to creat and choose ---Hedra---
Go to modify and ---Parameters-----Family------Dodec/Icos-----
In the --------Family Parameters-----:Type:---- P:0.32 Q:0.02
Axis Scaling :Type:---- P:89.5 Q:105 R:105 ----Vertics: Basic----
And -----Radius:120
*****Then*****
Apply ----Relax-----
---Parameters---Relax Value (-0.2)
Iterations (2)
And check Keep Boundary Pts Fixed
*****Then*****
Apply-----Mesh smooth----
Check (Apply To whole Mesh)
Iteration (1) ------ Smoothness (1.0)
*****Finaly*****
Go to-------Material Editor------- And choose (Mulity/Sub-Object)
And Set Number to 2 Materials
1-Blue 2-White
Don't Forget To press (assingn material to selection)
****************************To make the (Red/White) Ball**************************
Go to creat and choose ---Hedra---
Go to modify and ---Parameters-----Family------Dodec/Icos-----
In the --------Family Parameters-----:Type:---- P:0.32 Q:0.02
Axis Scaling :Type:---- P:89.5 Q:105 R:105 ----Vertics: Basic----
And -----Radius:120
*****Then*****
Apply ----Relax-----
---Parameters---Relax Value (-0.15)
Iterations (2)
And check Keep Boundary Pts Fixed
*****Then*****
Apply-----Mesh smooth----
Check (Apply To whole Mesh)
Iteration (1) ------ Smoothness (1.0)
*****Finaly*****
Go to-------Material Editor------- And choose (Mulity/Sub-Object)
And Set Number to 2 Materials
1-Red 2-White
Don't Forget To press (assingn material to selection)
تعليق