السلام عليكم
اند جوود افتر نون
هذا خبر شوي قديم وشوي جديد لكنه مهم في كلا الحالتين
وانا من زمااان وانا ابغى اكتب عنه لكن ماكان الوقت مناسب
لانه كان مجرد اشاعات منتشره عن قوته وقبل شهرين ظهر الموقع الرسمي له. وقبل شهر تقريبا بدأ حديث مطول عنه في الفورمز تبع هاي اند ثري دي
البرنامج الجاري تطويره تحت اسم جوهوست (Ghost) تغير اسمه وصار(برازيل)ولحد هذي اللحظه انا متأكد انكم تقولون (وبعدين !!)
هذا البرنامج اللي مخطط انه يكون مقبس للماكس في البدايه وبعدها يصبح مستقل(Stand Alone) هو افضل واقوي ..واسرع..برنامج
رندره تم انتاجه لحد الان
منتل ري :على جنب
ارنولد(ميشا ريندر): ابطأ منه بكثير
لايت سكيب : اصلا خارج المنافسه
اذا بتسألون وش المميز فيه . الجواب : حسب مايقال عنه كل شئ
فهو الاسرع حسب وصف اللي استخدموه ووصفوه بانه اسرع بمراحل من اقرب منافس وهو منتل ري
والافضل في جوده الصوره وواقعيتها وايضا الاشمل لاحتواءه الان او مستقبلا على معظم الخصائص الي منتشره بين البرامج المشابهه
شخصيا انا لاعرفه ولم اجربه وحتى لو جربته فماراح اطلع بنتيجه
لقله خبرتي وايضا لاني ما احب الكودينج (البرمجه)
لكن المتفق عليه ان برازيل هو اكثر مقبس للماكس او برنامج ريندره منتظر واكثرهم جاذبيه
المهم الان انه (بيتا) ويعمل كمقبس للماكس من الان للنسخه 3 و 4 من ماكس واللي يحب يجربه وله قدره على كسر غموض برنامج جديد يتفضل :
ماكس3 :
http://www.blur.com/BlurBeta/Brazil_...__R3_build.zip
ماكس4 :
http://www.blur.com/BlurBeta/Brazil_...__R4_build.zip
وطريقه التشغيل كمقبس للماكس ساقوم بنسخها من الموقع ووضعها في اخر الموضوع
وياليت اللي يعرف برمجه ايضا مع خبرته في الماكس يجربه ايضا لان بعض اقوى خصائص البرناج تعتمد على الكودينج ويمكن كلها
وللمعلوميه فقط انا قلت انها بيتا وهو الاصح انه الفا وهذا يعني ان بعض الخصائص لسه ما اكتملت وبعضها لم تختبر بعد
المهم جربوه واذا كان استاذنا ابوبدر قرا الموضوع فياليت يجربه لانه يمكن يطلع بنتيجه او تحليل عنه
وراح انشر بعض الصور اللي تمت رندرتهابواسطته من خلال ماكس
والله يعينكم على الصبر وانتظار تحميلها ومنهابعض الصور اللي وضعت لها لينكات فقط لاني استطيع نشرها كلها في نفس الصفحه
http://www.blur.com/blurbeta/brazilg...master0000.jpg
http://www.blur.com/blurbeta/brazilg...ours_gamma.jpg
http://www.blur.com/blurbeta/brazilg..._3hr_3-min.jpg
http://www.blur.com/blurbeta/brazilg...mg_caustic.jpg
http://www.blur.com/blurbeta/brazilgallery/img_bot.jpg
http://www.blur.com/blurbeta/brazilg...-and-mommy.jpg
http://www.blur.com/blurbeta/brazilg...ump_test_7.jpg
http://www.blur.com/blurbeta/brazilg...razil_room.jpg
http://www.blur.com/blurbeta/brazilgallery/img_Salt.jpg
http://www.blur.com/blurbeta/brazilg...g_nb_glass.jpg
واخيرا هذه هي طريقه التركيب كمقبس لماكس3 او 4 قمت بنسخها من الموقع :
Installation Instructions:
Although there are several ways to install this set of plugins, the following is what we recommend.
1) Make a new directory under your current plugins directory called "Brazil". Place the three plugins "braziltestFX.dlv", "brazilcore.dlu", and "braziltestmtl.dlt" into this directory.
2) Now the ini file. First, we have not tested what will happen if you have brazil and a rayfx anything in the same scene. So we recommend splitting rayfx and brazil. To do this, if you're starting from a base install of 3.1, move all files concerning rayfx (rayfx.dlu, raymtl.dlt, raytex.dlt) that currently exist in stdplugs into a seperate directory under plugins (like a directory called rayfx). Edit your plugin.ini file (located in your root max directory) such that rayfx will still be found when starting max. An example is below...
Standard MAX plug-ins=D:\shiva\StdPlugs\
Standard MAX plug-ins=D:\shiva\Plugins\
rayfx=D:\shiva\Plugins\Rayfx\
If you have already installed some new rayfx stuff such as RayFX_toon or RayFX_area_shadows, we again recommend moving all rayfx related files to a seperate directory (or set of directories), and make the appropriate changes to plugin.ini.
Rebooting max should get you right back where you started, able to use the raytrace material, etc.
Now that rayfx is in it's own little world, edit your plugin.ini, and add your brazil directory to the list. Comment out your rayfx directories so they won't load. An example is below.
Standard MAX plug-ins=D:\shiva\StdPlugs\
Standard MAX plug-ins=D:\shiva\Plugins\
;rayfx=D:\shiva\Plugins\Rayfx\
New Entry=D:\shiva\Plugins\Brazil\
Save this ini file as Brazil.ini.
3) Now copy your current shortcut to max to make a second shortcut to max. Righclick it and choose properties. Go to the shortcut tab, and make sure you're using the brazil plugin ini by typing the following...
D:\shiva\3dsmax.exe -p brazil.ini
in target (replacing d:\shiva with whatever your max install is).
4) Now if you run your original shortcut, you'll get a copy of max with all your rayfx stuff intact. Running this new shortcut (which you may wish to name "Shiva Brazil") will load max without rayfx but with the new brazil stuff.
5) Brazil Render is a Render Effect (see the faq and the main documentation for why) and there is a Material called Brazil Test Mtl. Have "fun".
اند جوود افتر نون
هذا خبر شوي قديم وشوي جديد لكنه مهم في كلا الحالتين
وانا من زمااان وانا ابغى اكتب عنه لكن ماكان الوقت مناسب
لانه كان مجرد اشاعات منتشره عن قوته وقبل شهرين ظهر الموقع الرسمي له. وقبل شهر تقريبا بدأ حديث مطول عنه في الفورمز تبع هاي اند ثري دي
البرنامج الجاري تطويره تحت اسم جوهوست (Ghost) تغير اسمه وصار(برازيل)ولحد هذي اللحظه انا متأكد انكم تقولون (وبعدين !!)
هذا البرنامج اللي مخطط انه يكون مقبس للماكس في البدايه وبعدها يصبح مستقل(Stand Alone) هو افضل واقوي ..واسرع..برنامج
رندره تم انتاجه لحد الان
منتل ري :على جنب
ارنولد(ميشا ريندر): ابطأ منه بكثير
لايت سكيب : اصلا خارج المنافسه
اذا بتسألون وش المميز فيه . الجواب : حسب مايقال عنه كل شئ
فهو الاسرع حسب وصف اللي استخدموه ووصفوه بانه اسرع بمراحل من اقرب منافس وهو منتل ري
والافضل في جوده الصوره وواقعيتها وايضا الاشمل لاحتواءه الان او مستقبلا على معظم الخصائص الي منتشره بين البرامج المشابهه
شخصيا انا لاعرفه ولم اجربه وحتى لو جربته فماراح اطلع بنتيجه
لقله خبرتي وايضا لاني ما احب الكودينج (البرمجه)
لكن المتفق عليه ان برازيل هو اكثر مقبس للماكس او برنامج ريندره منتظر واكثرهم جاذبيه
المهم الان انه (بيتا) ويعمل كمقبس للماكس من الان للنسخه 3 و 4 من ماكس واللي يحب يجربه وله قدره على كسر غموض برنامج جديد يتفضل :
ماكس3 :
http://www.blur.com/BlurBeta/Brazil_...__R3_build.zip
ماكس4 :
http://www.blur.com/BlurBeta/Brazil_...__R4_build.zip
وطريقه التشغيل كمقبس للماكس ساقوم بنسخها من الموقع ووضعها في اخر الموضوع
وياليت اللي يعرف برمجه ايضا مع خبرته في الماكس يجربه ايضا لان بعض اقوى خصائص البرناج تعتمد على الكودينج ويمكن كلها
وللمعلوميه فقط انا قلت انها بيتا وهو الاصح انه الفا وهذا يعني ان بعض الخصائص لسه ما اكتملت وبعضها لم تختبر بعد
المهم جربوه واذا كان استاذنا ابوبدر قرا الموضوع فياليت يجربه لانه يمكن يطلع بنتيجه او تحليل عنه
وراح انشر بعض الصور اللي تمت رندرتهابواسطته من خلال ماكس
والله يعينكم على الصبر وانتظار تحميلها ومنهابعض الصور اللي وضعت لها لينكات فقط لاني استطيع نشرها كلها في نفس الصفحه
http://www.blur.com/blurbeta/brazilg...master0000.jpg
http://www.blur.com/blurbeta/brazilg...ours_gamma.jpg
http://www.blur.com/blurbeta/brazilg..._3hr_3-min.jpg
http://www.blur.com/blurbeta/brazilg...mg_caustic.jpg
http://www.blur.com/blurbeta/brazilgallery/img_bot.jpg
http://www.blur.com/blurbeta/brazilg...-and-mommy.jpg
http://www.blur.com/blurbeta/brazilg...ump_test_7.jpg
http://www.blur.com/blurbeta/brazilg...razil_room.jpg
http://www.blur.com/blurbeta/brazilgallery/img_Salt.jpg
http://www.blur.com/blurbeta/brazilg...g_nb_glass.jpg
واخيرا هذه هي طريقه التركيب كمقبس لماكس3 او 4 قمت بنسخها من الموقع :
Installation Instructions:
Although there are several ways to install this set of plugins, the following is what we recommend.
1) Make a new directory under your current plugins directory called "Brazil". Place the three plugins "braziltestFX.dlv", "brazilcore.dlu", and "braziltestmtl.dlt" into this directory.
2) Now the ini file. First, we have not tested what will happen if you have brazil and a rayfx anything in the same scene. So we recommend splitting rayfx and brazil. To do this, if you're starting from a base install of 3.1, move all files concerning rayfx (rayfx.dlu, raymtl.dlt, raytex.dlt) that currently exist in stdplugs into a seperate directory under plugins (like a directory called rayfx). Edit your plugin.ini file (located in your root max directory) such that rayfx will still be found when starting max. An example is below...
Standard MAX plug-ins=D:\shiva\StdPlugs\
Standard MAX plug-ins=D:\shiva\Plugins\
rayfx=D:\shiva\Plugins\Rayfx\
If you have already installed some new rayfx stuff such as RayFX_toon or RayFX_area_shadows, we again recommend moving all rayfx related files to a seperate directory (or set of directories), and make the appropriate changes to plugin.ini.
Rebooting max should get you right back where you started, able to use the raytrace material, etc.
Now that rayfx is in it's own little world, edit your plugin.ini, and add your brazil directory to the list. Comment out your rayfx directories so they won't load. An example is below.
Standard MAX plug-ins=D:\shiva\StdPlugs\
Standard MAX plug-ins=D:\shiva\Plugins\
;rayfx=D:\shiva\Plugins\Rayfx\
New Entry=D:\shiva\Plugins\Brazil\
Save this ini file as Brazil.ini.
3) Now copy your current shortcut to max to make a second shortcut to max. Righclick it and choose properties. Go to the shortcut tab, and make sure you're using the brazil plugin ini by typing the following...
D:\shiva\3dsmax.exe -p brazil.ini
in target (replacing d:\shiva with whatever your max install is).
4) Now if you run your original shortcut, you'll get a copy of max with all your rayfx stuff intact. Running this new shortcut (which you may wish to name "Shiva Brazil") will load max without rayfx but with the new brazil stuff.
5) Brazil Render is a Render Effect (see the faq and the main documentation for why) and there is a Material called Brazil Test Mtl. Have "fun".
تعليق