Unconfigured Ad Widget

تقليص

إعـــــــلان

تقليص
لا يوجد إعلان حتى الآن.

درس أنجليزى جبار و مدهش

تقليص
X
 
  • تصفية - فلترة
  • الوقت
  • عرض
إلغاء تحديد الكل
مشاركات جديدة

  • درس أنجليزى جبار و مدهش

    The following tutorial is courtesy of "The Photoshop CS 2 Book for Digital Photographers" by Scott Kelby
    Before Photoshop CS2's introduction of the Vanishing Point filter, cloning away things in perspective was one of the hardest removal tasks of all. Luckily, this incredibly cool filter not only simplifies removing things in perspective, it actually makes it fun. In fact, this is one of those filters that's so amazing, you can wind up spending hours cloning away things that have no business being cloned away. Don't say I didn't warn you.
    Click to enlarge


    STEP 1
    Here's a photo of my buddy Dave Moser. We were shooting the International Car Show on press day (which is why you only see cleaning crew in the background), and Dave was lying on his back shooting a Hummer H2 that was positioned on an angle. Where's Dave's tripod, you might ask? I asked the same question, but apparently Dave doesn't mind camera shake (kidding). Anyway, since he didn't use a tripod, he should be cloned out of this photo to hide the evidence. Start by clicking on the Create a New Layer icon in the Layers palette so we can do our cloning work on a new blank layer.
    Click to enlarge


    STEP 2
    Go under the Filter menu and choose Vanishing Point (it's near the top). First, you have to define the angle of perspective by drawing with the Create Plane tool (C). (Don't let the fancy name throw you - you use it pretty much like you would the Polygonal Lasso tool.) Just click where you want to start, and keep clicking at angles to create your selection. (Here, I clicked halfway down the road along the carpet's edge, clicked at the end of the carpet at the bottom of the image, and then clicked again where I thought the road's yellow line would end.)
    Click to enlarge


    STEP 3
    Now use the tool to trace down the yellow line. You can pretty much see what's going on here - I'm simply tracing the area that has the perspective angle of the photo.
    TIP
    When you're placing these points far away (like I am here), you can temporarily zoom in to make sure you're lining them up correctly by pressing the letter X.
    Click to enlarge


    STEP 4
    When you reach the original point you started with, a blue grid will appear. Well, hopefully it's a blue grid. If it's blue, it means you drew it correctly, and Vanishing Point is happy with you. If it's yellow, it means that you're close, and it may work, but you'd be better off switching to the Edit Plane tool (V) (it looks like an arrow) and adjusting your points until they turn blue. If your grid outline turns red, it's a bad grid (your perspective isn't right), and you'll need to tweak the points until it's right.
    Click to enlarge


    STEP 5
    Once your blue grid is in place, you can stretch it to cover the object you want to remove. Just click on one of the center points using the Edit Plane tool, and drag in the direction you want the grid to spread. In the example shown here, I grabbed the right-center point and dragged it over to the right until Dave's legs and feet were covered.
    Click to enlarge


    STEP 6
    Press S to switch to the Stamp tool (it looks like the Clone Stamp tool), and the grid in the center will go away, leaving just the Blue outline to show the boundaries of the grid. Option-click (PC: Alt-click) on a straight line in your image (if possible) to help you line things up. In this case, I Option/Alt-clicked on the line where the black and gray carpets meet.
    Click to enlarge


    STEP 7
    Now, just move up that line and click to start painting. As you do, the unwanted object (Dave) is removed, and the cloning automatically adjusts for the perspective. In this example, you can see how the white line automatically shrinks as it moves away.
    Click to enlarge


    STEP 8
    Like the regular Clone Stamp tool, if you paint too far, it starts cloning over itself (meaning it's picking up other objects) so just paint a little bit (say 1/2" or so); then move to a different area, Option/Alt-click again, and this time clone over the legs. Again, just clone away a little of his legs at a time - don't try to remove them all at once, or you'll start cloning objects back in.
    Click to enlarge


    STEP 9
    Continue using this technique to clone away other unwanted areas. Remember to Option/Alt-click several times to keep the retouch looking random, and to keep from "repeat" cloning. When it looks good to you, click OK in the dialog. Since the cloning will appear on a separate layer, you can adjust it or easily erase any extra areas (if you cloned too large an area, for example). With the perspective right on the money, Vanishing Point works wonders.
    Click to enlarge


    TIP
    If you notice any repeating patterns in your cloning, just click on to Layer 1, get the Patch tool (Shift-J), draw a selection around one of the repeating patterns, drag the selection into a new area on that layer, and the repeating pattern will be removed. Press Command-D (PC: Control-D) to deselect.
    يُخاطٍبني السَفيه بكـل قـُبح فـــأكــره أن أكون له مجيباً

    يزيد سفاهة فازيد حلماً كعود زاده الاحراق طيبا

    فإن تـَكلم السـَفيه فلا تـُجبه - فإن خيرا ً من إجابته السكوت

    فإن تكلمت أفرجت عنه - و إن سَكت كَمدا ً يـَموت
    ولا تعطين الرأي من لا يريده ... فلا أنت محمود ولا الرأي نافعه



    مختارات من الأمام الشافعى رحمه الله
    لا إله إلا أنت سبحانك إنى كنت من الظالمين
    سبحان الله و بحمده - سبحان الله العظيم

  • #2
    مشكور جدا اخي الكريم

    تعليق


    • #3
      جدا ممتاز
      يعطيك العافية



      مو لازم التوقيع

      تعليق


      • #4
        درس رائع مشكور يأخوي يااااااااااااااااااااااااليت أحد يتكرم يشرحه بالعربي حتى لو الاشياء الاساسيه


        وشكراً

        تعليق


        • #5
          ارجو منك أخي ذكر المصدر

          تعليق


          • #6
            تسلم ايدينك يالغالي ..

            فعلا درس مدهش .. ويغنينا عن الأداة البدائية ( cone tool ) :d والتي أصبحت قديمة بعد هذا الدرس
            - - -
            No Pain .. No Gain
            - - -

            تعليق


            • #7
              Thanx alot dear FRIENDZ, sorry i gonna type in' English i could not find Arabic s-files 4 windows,, it was great lesson ""ve ya got the E-book if yes just inform ah122ed@gmail.com
              MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKN^^MADE BY DARKEN<

              تعليق


              • #8
                مشكور أخى على هذا الدرس الرائع..
                M HAMMAD
                M.A.Moniem

                الله--سبحان الله وبحمده سبحان الله العظيم--المستعان
                قال الأنيمتور المناضل منعم كامل :
                لو لم أكن أنيمتور لوددت أن أكون أنيمتور

                تعليق


                • #9
                  العفوأخوانى-- ومشكورين على المرور -- اما الدروس والله انا مخزنها على جهازىو كنت قد حصلت على الكثير منها من بعض المصممين الأجانب عبر الماسينجر وانت خير العارفين كيف يبخل هؤلاء بذكر المصدر
                  يُخاطٍبني السَفيه بكـل قـُبح فـــأكــره أن أكون له مجيباً

                  يزيد سفاهة فازيد حلماً كعود زاده الاحراق طيبا

                  فإن تـَكلم السـَفيه فلا تـُجبه - فإن خيرا ً من إجابته السكوت

                  فإن تكلمت أفرجت عنه - و إن سَكت كَمدا ً يـَموت
                  ولا تعطين الرأي من لا يريده ... فلا أنت محمود ولا الرأي نافعه



                  مختارات من الأمام الشافعى رحمه الله
                  لا إله إلا أنت سبحانك إنى كنت من الظالمين
                  سبحان الله و بحمده - سبحان الله العظيم

                  تعليق


                  • #10
                    شكرا اخي
                    فقط سؤالي عن المصدر حتى نطلع على بقية الدروس
                    الدرس موجود هنا في هذا الكتاب:

                    The Photoshop CS 2 Book for Digital Photographers

                    شكرا لك مرة أخرى علىالدرس

                    تعليق


                    • #11
                      درس خطييييييييييييييييييييييييييييييييييييييييييير
                      تسلم اخوي
                      احد اعضاء فريق الافتر ايفيكت العربي


                      عالمي
                      عالم التصميم و الخيال ....عالم كله الوان .... عالم مليئ بالأسرار و المفاجئات .... عالم لا نراه بأعين حقيقة ... عالم بين ظلاله نعيش
                      و أعيش
                      mnory-@hotmail.com

                      تعليق


                      • #12
                        فيه أحد يقدر يترجمه ليستفيد الجميع
                        ومشكور أخي m.G.m على الدرس الرائع
                        مــعــرضــي

                        تعليق


                        • #13
                          الدرس رائع اخى سلمت يمينك
                          *******************************
                          ردد معى : سبحان الله وبحمده سبحان الله العظيم

                          الان اطلب مساحتك
                          الجيجا بــ 120$ فقط ولفترة محدودة والطلب من هنا
                          www.ring4host.com

                          تعليق

                          يعمل...
                          X