أخي حسام ماكس اخي عمر العماري أخي john_silver
شكرا لك وما عليش انا اسف مايا الذي حصلت علية هو الاصدار الثالث اما سوفت ايميج فهو الاصدار الرابع وكذلك حصلت على ماكس الاصدار4 كامل لكن يبدو ان فيه مشاكل ووعدني الشخص خلال ايام انة سوف تاتية نسخة كاملة من امريكا حسب كلامة الله اعلم
اخي حسام ماكس اخي جوهن سلفر اخي عمر حاولت ان اقوم بتركيب مايا وسوفت ايميج لكن لم استطع وهذا هوالمكتوب في طريقة تركيب سوفت ايميج:-
SOFTIMAGE|XSI 1.5 Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1. Unzip/unrar all files.
2. Install with setup_nt.exe.
3. Extract files from crack.zip into c:\flexlm.
4. If you dont have a flexlm icon in your control panel put flexlm.cpl into your \winnt\system32 directory.
5. Run the keygen and save the content to a file xsi.dat.
6. Set LM_LICENSE_FILE to c:\flexlm\xsi.dat.
7. Start the license server.
8. Start the program.
------------------------------------------------------------------
وهذا هو المكتوب في طريقة تشغيل مايا 3:-
Installing Maya3
run autorun.exe
click install maya
choose to install maya unlimited (why go for less)
skip the license installation, doing it by hand is so much more fun...
Installing a Maya3 floating license server:
overwrite c:\aw\com\etc\sgiawd.exe with the provided harvest sgiawd.exe
open the provided aw1.dat in your favorite texteditor, edit the part that says <your computer> to the name of your machine (in doubt, run "hostname" in a cmd prompt).
if you have other flexlm servers running, port 744 might be taken allready and you can put a different port in the SERVER line.
edit the path for sgiawd.exe to where you installed it.
save the file as c:\flexlm\aw_servername.dat (this MUST be on the c: drive)
- where servername again is replaced with the name of your computer
run c:\aw\com\bin\lmtools.exe (or from whatever drive you installed maya to)
check "configuration using services"
select the "configure services" tab
enter a Service Name (maya3flex for example)
click next to each of the path fields to browse for your file locations
c:\AW\COM\etc\lmgrd.exe
C:\FLEXlm\aw_servername.dat
C:\FLEXlm\aw_servername.log (if the file is not allready there, just enter the path)
check "use services" and "start server at powerup" if you want to start up the license server when you start windows
click "Save Service" - and "Yes"
go to the "Start/Stop/Reread" tab
select the maya3flex service you just created and click "Start Server"
all this flex stuff offcause won't work if you don't have the TCP/IP stack running - the MS loopback driver is fine if you don't have a network card.
Have Phun!
يا ليت يا اخوان تساعدوني في تركيب البرنامجين
وشكرا لكم على المساعدة
شكرا لك وما عليش انا اسف مايا الذي حصلت علية هو الاصدار الثالث اما سوفت ايميج فهو الاصدار الرابع وكذلك حصلت على ماكس الاصدار4 كامل لكن يبدو ان فيه مشاكل ووعدني الشخص خلال ايام انة سوف تاتية نسخة كاملة من امريكا حسب كلامة الله اعلم
اخي حسام ماكس اخي جوهن سلفر اخي عمر حاولت ان اقوم بتركيب مايا وسوفت ايميج لكن لم استطع وهذا هوالمكتوب في طريقة تركيب سوفت ايميج:-
SOFTIMAGE|XSI 1.5 Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1. Unzip/unrar all files.
2. Install with setup_nt.exe.
3. Extract files from crack.zip into c:\flexlm.
4. If you dont have a flexlm icon in your control panel put flexlm.cpl into your \winnt\system32 directory.
5. Run the keygen and save the content to a file xsi.dat.
6. Set LM_LICENSE_FILE to c:\flexlm\xsi.dat.
7. Start the license server.
8. Start the program.
------------------------------------------------------------------
وهذا هو المكتوب في طريقة تشغيل مايا 3:-
Installing Maya3
run autorun.exe
click install maya
choose to install maya unlimited (why go for less)
skip the license installation, doing it by hand is so much more fun...
Installing a Maya3 floating license server:
overwrite c:\aw\com\etc\sgiawd.exe with the provided harvest sgiawd.exe
open the provided aw1.dat in your favorite texteditor, edit the part that says <your computer> to the name of your machine (in doubt, run "hostname" in a cmd prompt).
if you have other flexlm servers running, port 744 might be taken allready and you can put a different port in the SERVER line.
edit the path for sgiawd.exe to where you installed it.
save the file as c:\flexlm\aw_servername.dat (this MUST be on the c: drive)
- where servername again is replaced with the name of your computer
run c:\aw\com\bin\lmtools.exe (or from whatever drive you installed maya to)
check "configuration using services"
select the "configure services" tab
enter a Service Name (maya3flex for example)
click next to each of the path fields to browse for your file locations
c:\AW\COM\etc\lmgrd.exe
C:\FLEXlm\aw_servername.dat
C:\FLEXlm\aw_servername.log (if the file is not allready there, just enter the path)
check "use services" and "start server at powerup" if you want to start up the license server when you start windows
click "Save Service" - and "Yes"
go to the "Start/Stop/Reread" tab
select the maya3flex service you just created and click "Start Server"
all this flex stuff offcause won't work if you don't have the TCP/IP stack running - the MS loopback driver is fine if you don't have a network card.
Have Phun!
يا ليت يا اخوان تساعدوني في تركيب البرنامجين
وشكرا لكم على المساعدة
تعليق